DMLS Materials

  • Aluminium AlSi10Mg
  • CobaltChrome MP1
  • CobaltChrome SP2
  • MaragingSteel MS1
  • NickelAlloy IN625
  • NickelAlloy IN718
  • StainlessSteel GP1
  • StainlessSteel PH1
  • Titanium Ti64

pdf-iconEOS AlSi10Mg Brochure

AlSi10Mg is a typical casting alloy with good casting properties and is used for cast parts with thin walls and complex geometry. The alloying elements silicon and magnesium lead to high strength and hardness. The alloy also features good dynamic properties and is therefore used for parts subject to high loads. Parts in EOS Aluminium AlSi10Mg are ideal for applications which require a combination of good thermal properties and low weight.

Applications

  • Direct manufacture of functional prototypes
  • Small production runs
  • Automotive
  • Engineering
  • Motor racing
  • Aerospace
  • Prototype parts for aluminium die casting

pdf-iconEOS CobaltChrome MP1 Brochure

EOS CobaltChrome MP1 produces parts in a cobalt-chrome-molybdenum-based superalloy. This class of superalloy is characterized by having excellent mechanical properties (strength, hard-ness etc.), corrosion resistance and temperature resistance. Such alloys are commonly used in biomedical applications such as dental and medical implants (note: widely used in Europe but much less so in North America), and also for high-temperature engineering applications such as in aero engines.

Properties

  • High strength, temperature and corrosion resistance
  • Mechanical properties improve with increased temperature up to 500-600 °C
  • Chemistry conforms to the composition UNS R31538 of high carbon CoCrMo alloy
  • Nickel-free (< 0.1 % nickel content).
  • Fulfils the mechanical and chemical specifications of ISO 5832-4 and ASTM F75 for cast CoCrMo implant alloys

Applications

  • High-temperature engineering applications, e.g. turbines, medical implants

pdf-iconEOS CobaltChrome SP2 Brochure

CE-certified metal material for series production

For manufacturing crowns and bridges, the EOSINT M 270 processes a special cobalt chromium molybdenum-based superalloy. It is biocompatible and CE-certified for use in the dental industry (CE 0537). This established dental prosthesis material has seen considerable demand in recent years and is very cost-efficient compared to precious metal alloys. The Schwickerath bonding strength according to EN ISO 9693 using recommended VITA VM13 ceramic is 42 MPa. The amount of extractable ions released from EOS CobaltChrome SP2 laser processed according to Instructions for Use is 1.86 mg / cm2 / 7 days determined in the static immersion test according to EN ISO 10993-15.

Benefits

  • CE-certified for use in the dental industry (CE 0537)
  • Biocompatible
  • Cost-efficient compared to precious metal alloys
  • High tensile strength
  • High temperature and corrosion resistance

pdf-iconEOS MaragingSteel MS1 Brochure

EOS MaragingSteel MS1 is a martensite-hardenable steel. Its chemical composition corresponds to US classification 18% Ni Maraging 300, European 1.2709 and German X3NiCoMoTi 18-9-5. This kind of steel is characterized by having excellent strength combined with high toughness. The parts are easily machinable after the building process and can be easily post-hardened to more then 50 HRC. They also have excellent polishability.

Properties

  • Easily machinable
  • Age hardenable up to approx. 54 HRC
  • Good thermal conductivity

Applications

  • Series injection moulding, also for high volume production
  • Other tooling applications, e.g. aluminium die casting
  • High performance parts, e.g. for aerospace applications

pdf-iconEOS NickelAlloy IN625 Brochure

The precipitation and heat-resistant nickel-chromium alloy EOS NickelAlloy IN625 has a chemical composition corresponding to UNS N06625, AMS 5666F, AMS 5599G, W.Nr 2.4856, DIN NiCr22Mo9Nb.
It is characterized by having high tensile, creep and rupture strength. EOS NickelAlloy IN625 is expected to have good corrosion resistance in various corrosive environments. This material is also suitable for building complex parts for high-temperature and high-strength applications. The process achieves material properties that are comparable to wrought metals and by far exceeds those of casting.

Properties

  • high tensile, creep and rupture strength and good corrosion resistance in various corrosive environments

Applications

  • Aerospace
  • Motor sport
  • Applications in the maritime industry
  • Chemical industry parts

pdf-iconEOS NickelAlloy IN718 Brochure

EOS NickelAlloy IN718 is a nickel based heat resistant alloy. Its composition corresponds to UNS N07718, AMS 5662, AMS 5664, W.Nr 2.4668, DIN NiCr19Fe19NbMo3. This kind of precipitation-hardening nickel-chromium alloy is characterized by having good tensile, fatigue, creep and rupture strength at temperatures up to 700°C. The alloy also has outstanding corrosion resistance in various corrosive environments. This material is ideal for many high temperature applications such as gas turbine parts, instrumentation parts, power and process industry parts etc. The material also possesses excellent cryogenic properties and potential for cryogenic applications.

Properties

  • Outstanding corrosion resistance
  • High performance at temperatures up to 700°C, e.g. tensile strength, fatigue, creep and rupture

Applications

  • Aero and land based turbine engine parts
  • Rocket and space application components
  • Chemical and process industry parts
  • Oil wells, petroleum and natural gas industry parts

pdf-iconEOS StainlessSteel GP1 Brochure

EOS StainlessSteel GP1 is a stainless steel. Its chemical composition corresponds to US clas-sification 17-4, European 1.4542 and German X5CrNiCuNb16-4. This kind of steel is characterized by having good mechanical properties, especially excellent ductility in laser processed state, and is widely used in a variety of engineering applications. This material is ideal for many part-building applications (DirectPart) such as functional metal prototypes, small series products, individualised products or spare parts.

Properties

  • Good mechanical properties
  • Excellent ductility

Applications

  • Engineering applications including functional prototypes
  • Small series products
  • Individualised products or spare parts
  • Parts requiring particularly high toughness and ductility

pdf-iconEOS StainlessSteel PH1 Brochure

EOS StainlessSteel PH1 is a stainless steel. The chemical composition conforms to the com-positions of 15-5 PH, DIN 1.4540 and UNS S15500. This kind of steel is characterized by having excellent mechanical properties, especially in the precipitation hardened state. This type of steel is widely used in a variety of medical, aerospace and other engineering applications requiring high hardness and strength. This material is ideal for many part-building applications such as functional metal prototypes, small series products, individualised products or spare parts

Properties

  • Very high strength
  • Easily hardenable up to approx. 45 HRC

Applications

  • Engineering applications including functional prototypes
  • Small series products
  • Individualised products or spare parts
  • Parts requiring particularly high strength and hardness

pdf-iconEOS Titanium Ti64 Brochure

EOS Titanium Ti64 is a Ti6Al4V alloy. This well-known light alloy is characterized by having ex-cellent mechanical properties and corrosion resistance combined with low specific weight and biocompatibility. The ELI version (extra-low interstitials) has particularly high purity.

Properties

  • Light weight with high specific strength (strength per density)
  • Cor-rosion resistance
  • Biocompatibility
  • Laser-sintered parts fulfil requirements of ASTM F1472 (for Ti6Al4V) and ASTM F136 (for Ti6Al4V ELI) regarding maximum concentration of impurities
  • Very good bioadhesion (cell growth tested with good results)

Applications

  • Aerospace and engineering applications
  • Biomedical implants